The answer to your question depends on your application. If you will be towing heavy trailers and hauling heavy loads with frequency then the # RAS54FR would be the better choice with a higher capacity. If you're occasionally hauling or towing, and you won't exceed the 2,000 lb weight capacity, then you should get the # RAS4611.
If ride quality is your concern, you probably won't notice a difference between the two. However, it will be easier to fine tune the support on the # RAS4611.... view full answer...
First one reason there are so many kits for your 2021 Chevrolet Silverado is due to the Trail Boss coming with a suspension lift right from the factory. So half the available kits can only be used on the Trail Boss trim level.
There are going to be 2 kits that are available. First is the kit I always recommend using the Air Lift LoadLifter 5000 Ultimate. These air bags have internal jounce bumpers which help reduce bounce that you may get from the additional load. The bumpers also help... view full answer...
My contact at Extang said that there are not many practical differences between a vinyl tonneau cover like the Extang Trifecta 2.0 # EX92450 and the fabric/canvas Trifecta Signature 2.0 # EX94450 in terms of durability and maintenance.
Both will offer pretty much the same durability and resistance to punctures but the vinyl, in extreme temperatures (hot or cold), will tend to relax and contract a bit more than the fabric version # EX94450. Apart from this point your preference for one... view full answer...
When towing a heavy trailer with your 2014 Chevrolet Silverado 1500, the rear suspension will most likely drop due to the added weight placed on the vehicle. This added weight is going to cause issues such as improper headlight aim, poor braking, and an overall decreased sense of handling. Therefore, suspension enhancements like the Timbren Rear Suspension Enhancement System part # TGMRCK15S are needed.
The Timbrens work by placing a dense piece of rubber spring between the frame and rear... view full answer...
The big advantage to a dual path compressor, like the Air Lift Load Controller I Compressor System for Air Helper Springs - Dual Path # AL25651is that it allows you to air each spring separately. This way, if you are carrying a load in the bed that is not spread out evenly, you can provide more support to one side and get yourself nice and level again.
The single path options, like the Air Lift Load Controller II Compressor System for Air Helper Springs - Single Path # AL25592, will always... view full answer...
The Curt Class III Ball Mount # C45056 comes with a standard 2" hitch ball that can be removed and used in the drop or rise position with the ball mount while the Curt Fusion Ball Mount # C45154 has the 2" hitch ball welded to the platform so it can only be used in the drop position.
The Fusion looks a little cleaner but it does lose that rise position so I recommend going with the standard # C45056 just in case you ever need to remove the hitch ball and reinstall it on the other side... view full answer...
The difference between the # C45056 and the # C45154 is that the # C45154 is a fusion ball mount. Meaning the ball is permanent and can not be removed from the draw bar. The # C45056 has a removable ball. This allows it to be used in either the drop or rise position. Also, if you ever had a need to swap it out for a 1-7/8" or 2-5/16" ball you will be able to do so. Other than that they are virtually identical with a 7.5K capacity. If you will only ever be towing one horse trailer that uses... view full answer...
TracRac SR Sliding Truck Bed Ladder Rack # TH43002XT-608 does not fit the 2017 Chevy Silverado 1500 5-1/2 foot bed. The difference between it and the one that does fit your truck, # TH43002XT-782, is how they attach to the bed and where the mounting holes for the hardware need to be. So you won't be able to use the 21608 rails on a 2017 model. view full answer...
There are multiple front mount trailer hitch options for a 2019 Chevy Silverado 1500, the Curt part # C31088 and Draw-Tite part # DT44HR. The Draw-Tite was designed to work on 2.7L Turbo or 3.0L Diesel engine models whereas the Curt is incompatible at this time. I recommend the Draw-Tite due to the wider fit range. view full answer...
The biggest difference between the # C31012 and the # C31069 (both of which are confirmed to fit your 2018 Silverado 1500) is ground clearance. The Curt # C31069 will hang down 6-3/4 inches from the mounting surface and the # C31012 will hang down 8-3/16 inches. They will mount in the same location and both will require trimming the front air dam. view full answer...
There are two main differences between the Adarac Pro Series Custom Truck Bed Ladder Rack part # A4000948 and the Adarac Aluminum Series Custom Truck Bed Ladder Rack part # A4001223. This being the shape of the uprights and the dimensions of the crossbars. The crossbars included with the Aluminum Series are 66" long and the crossbars included with the Pro Series are 72" long. The other major difference between the two racks is that the Pro Series has vertical uprights that will allow for... view full answer...
We do have headache racks that fit the 2019 Chevrolet Silverado 1500, but we don't have the Aries Classic model for this vehicle.
Of the headache racks that fit your Silverado, the one closest in price to the # AA111000 that you referenced is the Buyers Products Kabgard Headache Rack - Black Powder Coated Steel, part # 33785104. It may not have the same look as the Aries Classic, but as you can see in the video review I've linked to below, it can accommodate toolboxes and does a good job... view full answer...
I prefer the Air Lift WirelessAIR Compressor System # AL58WQ as it has the smart manifold that will maintain air pressure to within the 3psi of your settings and a heavy duty compressor.
With the Air Command Compressor System # F2610 you are able to control it from your smart phone like the Air Lift compressor but it does not maintain the air pressure in the air bags. So you will want to check this every time before driving your truck to ensure that the correct pressure is in the air... view full answer...
I'll pick the etrailer branded tow bars over the Blue Ox alternative any day because of some key features that set them above Blue Ox:
- Triggers for easier disconnection of the arms
- Integrated safety cables so you it's one less thing to remember to grab
- Head adjustment to minimize the need for a high-low adapter (although you still may need one for a truck - see attached article)
- Integrated rod to help keep coiled wiring off the ground
- Stacked arms that provide a wider range... view full answer...
The Replacement Bar for B&W Biker Bar Motorcycle Tie-Down System # BWMC2302B is the replacement bar that fits H-D Dyna, Softail, and V-Rod bike frames. The # BWMC2301B is the Replacement Clamping Bar for B&W Biker Bar Motorcycle Tie-Down for Harley-Davidson Touring frames. The only difference is the bike frames that are compatible. view full answer...
The main difference between the Access Roctection Universal Mud Flaps # AC100001 and Access Roxter Universal Mud Flaps # AD100001 is the Roctection # AC100001 has an integrated stabilizer plate that prevents rocking back and forth. The Roxter uses a slightly different frame that slides together.
Both of the mudflaps will be a great addition to your 2018 Chevy Silverado if you're pulling a boat, ATV, camper or any other trailer or gear you don't want hit with rocks, road debris, or grime.... view full answer...
I have a solution for you.
First, though, the Thule Xsporter Pro Shift Overland, part # TH54RR, is in fact a fixed rack. I've had this updated.
For an adjustable one, I recommend the Yakima OverHaul HD, part # Y01151-59. It has a 500-lb capacity (the highest capacity of adjustable racks for your 2020 Chevrolet Silverado 1500).
I've linked to a video review of this below. view full answer...
So the difference between the Timbren Rear Suspension Enhancement System # TGMRCK15S and SuperSprings Custom Suspension Stabilizer and Sway Control Kit # SSA28 are the benefits they offer and what you are looking to get out of an enhancement system.
The Timbrens # TGMRCK15S are jounce springs and how they work is simple but effective. When you have additional weight at the rear of your truck, like when towing, it will sag, causing the front of the truck to rise. This causes your front... view full answer...
With the loaded tongue weight of both your trailers being at or around 900 pounds, the Curt # C17500 is getting a little close to the max capacity. The weight capacity of the Equal-i-zer # EQ37120ET is better, but you are pretty close to the minimum capacity with the enclosed trailer. And I do agree this is quite the price difference. With that being said, I am actually going to recommend a completely different weight distribution system.
The Reese Steadi-Flex Weight Distribution System... view full answer...
The SumoSprings Solo Custom Helper Springs # SS45FR and SumoSprings Solo Custom Helper Springs # SS65FR both have the same fitment but have different weight capacities. The # SS45FR is rated for 1,500lbs while the # SS65FR is only rated for 1,000lbs. view full answer...
Go To Results